Riser replacements, compensator programmes, valve work and mechanical plant, delivered building by building in towers that stayed occupied throughout. Filter by the kind of work below.
Heating & Cooling Riser Replacement
Replacement of the heating and cooling risers for the entire building, including supply and installation of all new copper pipe, expansion joints, anchors and fire stopping.
Heating & Cooling Riser Replacement
Full-building heating and cooling riser replacement with all new copper pipe, expansion joints, anchors and fire stopping, completed in an occupied tower.
Riser & Fan Coil Replacement
Riser replacement across 436 units including asbestos abatement and air-quality testing throughout. Delivered two months ahead of the eight-month schedule.
Riser & Fan Coil Replacement
Building-wide riser replacement with asbestos abatement and air-quality monitoring, carried out suite by suite with full floor protection in every unit.
Complete Riser Replacement
Complete low-zone and high-zone riser replacement with new isolation valves and access panels at every unit. All drywall repair completed by BMI's own finishing team.
Expansion Compensator Replacement
Removal and disposal of the existing expansion compensators throughout the building, with supply and installation of new units.
Domestic Hot Water & Riser Replacement
Entire building domestic hot water and riser replacement, including new heating plant tie-ins and full system testing.
Domestic Hot Water & Riser Replacement
Companion tower to 335 Driftwood: complete domestic hot water and riser replacement delivered on the same program.
Riser Replacement
Riser replacement including asbestos abatement and air-quality testing, completed two months ahead of the eight-month schedule.
Expansion Compensator Replacement
Full-building expansion compensator replacement, with the anchors and guides at each riser corrected back to structure and every riser refilled, vented and pressure tested.
Expansion Compensator Replacement
Companion tower to 5025 Four Springs: expansion compensators replaced throughout the building on the same programme, with guide spacing reset above and below every unit.
Valve Audit & Building-Wide Valve Replacement
Every valve in the building located, tagged and charted, then the failed and seized units replaced building-wide and the schedule reissued to match the building as it now stands.
Valve Audit & Building-Wide Valve Replacement
Companion tower to 12 Yonge: a full valve audit followed by building-wide replacement of the seized and passing valves, each new unit tagged and added to the chart as it went in.
Domestic Hot Water & Boiler Replacement
Entire building domestic hot water and heating boiler replacement with high-efficiency models, the full mechanical loop re-piped, tested and commissioned.
Heating Boiler Replacement
Removal of the existing heating boilers and installation of new high-efficiency Camus DynaFlame units, tested and commissioned.
No projects match that filter yet. Ask us — the page shows selected work rather than everything we have done.
Each links through to how the work is actually carried out, what the building can expect week to week, and what it is left holding at the end.
Domestic water, heating and cooling risers replaced stack by stack, with new isolation valves and access panels at every unit.
Failed units replaced building-wide, with anchors and guides corrected back to structure where the original install got it wrong.
Seized and passing valves replaced throughout, each new unit tagged and added to the chart as it goes in.
Complete and partial programmes for buildings where continued repair is no longer economic, scoped from measured condition.
PEX-AL-PEX systems taken out and re-piped in copper, suite by suite on a schedule the building sets.
Domestic hot water and heating boiler replacement, mechanical loops re-piped, tested and commissioned.
Most of our work comes from property managers who have used us before and from the buildings they recommend us to.
BMI is a leader in HVAC, plumbing, and the water saving industry in Toronto. I have been working with this company for more than 5 years, and honestly I have only successes and accomplishments. Their crew and upper management are really great, skilled, kind, caring, and professional. The MEV Valve was successfully installed by BMI in our building at TSCC2328. We are very pleased with the savings!
Working with BMI has been a great experience. We've done large HVAC and plumbing projects with BMI at our buildings at YRSCC1109. They've also installed the MEV Valve in our building. Their team is very professional and efficient. Our building saves around 20% on our monthly water bills with the MEV Valve. We highly recommend BMI.
Our corporation, TSCC2590, has installed the BMI MEV Valve in January of 2019. We have been very happy with the savings. We see around 20-25% in savings per month. We are very happy to recommend BMI to other corporations.
I was referred to BMI by my property management at my condo in Lakeshore Blvd West. Honestly, these guys were one of the best companies I have ever worked with. Their team was respectful and courteous, their technicians were incredibly knowledgeable and helpful, and the job was done very well. My unit needed to be replaced, and BMI took care of the whole replacement process quickly and efficiently. I would not hesitate to use BMI again and have recommended them to all of my friends and family!
I was referred to Kris and his team by my property management at our townhouse complex near Yonge and Sheppard. The drywall contractor really went out of his way to make sure we were happy when everything was closed up and painted. I know that BMI has extensive experience with Kitec replacement. Definitely consider them if you need to replace your Kitec pipes.
Send us the engineer's report, the reserve fund study, or just the problem the building keeps having. We will walk it, tell you what we actually think the scope is, and put it in writing.
